AIFILTECH Ceramic Fiber Blanket - High-Temperature Insulation Material

Temp rating 1050~1400 °C
Heat storage Low
Form Rolls & modules

Product Introduction

AIFILTECH ceramic fiber blankets are double-needle-punched for high tensile strength and flexibility, rated 1050-1400 °C with low thermal conductivity and low heat storage - for kiln linings, pipe insulation, expansion joints and high-temperature equipment insulation.

Specifications

FeaturesFlexible, low heat storage
CustomYes
BrandAIFILTECH
Material硅酸铝纤维 (标准/高纯/含锆)
Temperature1050-1400 ℃
Thickness6-50 mm
Density96-160 kg/m³
宽度600/1000/1200 mm

Detailed Overview

01 Product Overview

Ceramic fiber blankets are made from fiber blown or spun from high-temperature melting furnaces, then double-needle-punched and heat-stabilized into rolls. The 3D interwoven fiber structure gives high tensile and tear strength; blankets can be layered, folded into modules or wrapped around pipes. Zirconia-grade blankets are rated up to 1400 °C, making them the leading material for all-fiber linings.

02 Performance & Mechanism

Randomly interwoven fibers form abundant open and semi-open pores; trapped still air suppresses convection and conduction while the fiber network blocks radiation. Low heat storage allows fast furnace heat-up and cool-down, ideal for intermittent kiln energy saving.

03 Advantages

  • Double-needle-punched, high tensile and tear strength; 2. Rated 1050-1400 °C (zirconia grade); 3. Low thermal conductivity and heat storage for energy saving; 4. Flexible rolls for modules and pipe wrapping; 5. Chemically stable against most acids and alkalis.

04 Applications

Used for all-fiber kiln linings, expansion joints, high-temperature pipe insulation, flue duct insulation and marine boiler insulation. Fiber modules and vacuum-formed shapes are available.

Sizing & selection Q&A

Which material, and up to what temperature?

Aluminosilicate fibre in standard, high-purity or zirconia grades, rated 1050-1400 °C. The grade follows hot-face temperature, atmosphere and chemical attack — not the lowest quotation.

Can it be built to drawing?

Yes — blankets are cut to size, needled or needled with mesh facing, and folded or die-cut modules can be supplied. Field assembly uses anchors, not welding.

Minimum order and lead time?

Small trial batches are accepted and common sizes are held in stock.

Can we validate a sample first?

Yes. A small batch can be produced from your drawing or sample, run on your line, and scaled up only after both sides accept the result.

Applications

Kiln lining Pipe insulation Expansion joints Custom

All data above are obtained under specific test conditions; the actual solution must be engineered to site conditions. AIFILTECH provides custom design and sizing based on actual gas volume, temperature, dust characteristics and emission limits.

WhatsApp