Field Projects & Installation Cases

Real installation photos from diesel trucks, non-road machinery, generator sets and industrial hot-gas sites. AIFILTECH exhaust purification and high-temperature dust collection equipment runs with customer fleets across working conditions — this page grows as new projects go live.

Jiangmen 1800 kVA genset exhaust retrofit site

GENSET · FIELD CASE

Jiangmen 1800 kVA: smoke and CO in one pass

A Mitsubishi MGS1500B prime-power set replaced its water-filter purifier with a TKPD-24: dual DOC, 24 metal cores and an emergency bypass. No visible smoke after the retrofit, power continuity untouched.

Read the full case →

Cement plant 300 kW standby genset room before SCR retrofit

GENSET · FIELD CASE

Cement plant 300 kW standby set: urea SCR

A Shuangma SMKP-300GF set received BOSCH urea dosing and a 345 × 1100 mm reactor, dosed by exhaust temperature, with the engine and emergency start-up logic untouched.

Read the full case →

NON-ROAD MACHINERY

Heli heavy-duty forklift exhaust purifier retrofit

Metal DPF after-treatment integrated into the chassis-side exhaust system. Installation keeps full clearance for forks and counterweight, with the maintenance port facing outward for easy cartridge inspection.

Metal filter bags & cartridges →

NON-ROAD MACHINERY

Lonking wheel loader purifier installation

Wheel loaders run in high-dust, stop-start conditions. The purifier follows the original exhaust path to keep hydraulic service access clear, so routine cleaning can be scheduled with normal machine maintenance.

Metal filter bags & cartridges →

CONSTRUCTION

Mobile crane exhaust purifier installation

Upper-structure boom duty and lower-carriage drive demand a tight retrofit envelope. The unit is fixed on segmented brackets, clear of the slewing ring and outrigger travel.

Metal filter bags & cartridges →

PORT & MARINE

Port machinery purifier installation

Gantry cranes and port handlers run long shifts under heavy load. The stainless purifier replaces the original silencer section, balancing back-pressure and noise without slowing the operating cycle.

Metal filter bags & cartridges →

AIRPORT GSE

Airport ground-support tractor retrofit

Compact engine bays leave little room for after-treatment. The unit is mounted horizontally with fuel and wiring service channels preserved, matching short, frequent duty cycles between flights.

Metal filter bags & cartridges →

ON-ROAD TRUCKS

Heavy-duty truck metal DPF retrofit

In-service trucks get a metal DPF fitted in the original silencer position as a single unit, keeping the vehicle inspection-ready. Cleaning and regeneration follow the maintenance manual schedule.

Metal filter bags & cartridges →

INDUSTRIAL HOT GAS

High-temperature dust collection system assembly

Complete high-temperature dust collection systems are assembled and pressure-tested in our workshop. Modular filter rows arrive ready for lifting, ducting and cleaning-air hookup on site.

Metal filter bags & cartridges →

WASTE INCINERATION

Waste incineration flue-gas filtration site

Incinerator flue gas is hot and chemically aggressive. Ceramic fiber filter tubes handle dust removal and denitration in one vessel, with no flue-gas reheating system required.

Ceramic fiber filter tubes →

Which purification setup fits your equipment? Send us the machine type, working condition and emission requirement — our engineers will recommend the right configuration.