Thermal Insulation for Dust Collection Systems

Max. Temp. Ceramic fiber modules
Energy Saving Low heat loss
Delivery Cladding & anchor kits

Product Introduction

AIFILTECH thermal insulation works cover collector casings, ducting and cyclones using layered ceramic fiber modules - lower heat loss, prevented dew-point corrosion, with anchors and cladding included.

Specifications

FeaturesLower heat loss
CustomYes
BrandAIFILTECH
MaterialsCeramic fiber modules·AS blankets
AreasCasing·Ducts·Cyclones·Flues
CladdingGalvanized/Stainless

Detailed Overview

01 Product Overview

Insulation of hot dust collection systems directly affects equipment life and energy consumption. AIFILTECH insulates collector casings, ducts, cyclones and expansion joints, selecting ceramic fiber modules and alumina-silica blankets by medium temperature, laid in staggered layers and finished with galvanized or stainless cladding for weather protection.

02 Workmanship

Surface preparation and anchor welding - staggered layered ceramic fiber blanket/module installation - metal cladding with seaming - removable sections at expansion joints and flanges. Compaction density and joint tightness are controlled to avoid thermal bridges and air leakage.

03 Advantages

  • Ceramic fiber modules with stable high-temperature performance and low heat loss;<br>2. Staggered layered layout minimizes thermal bridging;<br>3. Weatherproof cladding for outdoor service;<br>4. Removable design at dynamic parts for easy maintenance.

04 Applications

Collector casing insulation, hot duct insulation, cyclone and flue insulation, and repair of damaged insulation or energy-saving upgrades.

Sizing & selection Q&A

Can particulate stay below 10 mg/Nm³?

On normal duty, yes. With very high inlet loading or sticky dust, a pilot run sets the filtration velocity first so acceptance is not at risk.

Who handles site installation?

Site supervision can be supplied, or remote support only; civils and steel structure usually stay with the owner.

Is leak detection online?

Online leak detection locates a failed compartment during operation, avoiding a full teardown.

What do you need from me to quote?

Flow rate, temperature and gas composition, plus the installation envelope. Those three are enough for a proposal; the rest is settled at technical agreement stage.

Applications

Collector casing Hot ducts Cyclones and flues

All data above are obtained under specific test conditions; the actual solution must be engineered to site conditions. AIFILTECH provides custom design and sizing based on actual gas volume, temperature, dust characteristics and emission limits.

WhatsApp