AIFILTECH FeCrAl Sintered Metal Fiber Felt

Max. Temp. 1300℃
Continuous Use 1000~1150℃
Feature Electric / thermal

Product Introduction

FeCrAl sintered felt is rated up to 1000 °C with excellent oxidation and sulfidation resistance and stable resistivity - for high-temperature flue gas filtration, metal fiber burner nozzles and electric heating elements, a cost-effective upgrade over stainless felt in hot service.

Specifications

最高使用温度1300 ℃
长期使用温度1000-1150 ℃
抗氧化机制表面自生成致密 Al₂O₃ 保护膜
加工性可折波、可焊接、抗变形
特性韧性好、抗热震、耐振动
Application燃烧器、电热、高温烟气过滤

Detailed Overview

01 Product Overview

FeCrAl felt is sintered from FeCrAl alloy fibers. Aluminum forms a dense Al2O3 protective scale at high temperature, greatly improving oxidation and carburization resistance. The felt has high porosity and good permeability and works about 200 °C hotter than 316L felt. Its high, temperature-stable resistivity suits large-area uniform porous burners and heating elements.

02 Performance & Mechanism

FeCrAl fiber felt is a porous metal medium made of iron-chromium-aluminum alloy fiber by non-woven laying and high-temperature sintering, rated 1000-1150 °C for continuous service and up to 1300 °C peak. At high temperature a dense self-grown Al2O3 oxide layer forms on the fiber surface and blocks further oxidation - a self-healing protection mechanism ensuring long life. Compared with ceramic media it is tough (no brittleness or particle shedding), crack-free under frequent thermal cycling, vibration-resistant, and can be corrugated and welded. Its electric-heating-alloy nature makes it ideal for porous burners, industrial electric heating and hot-gas filtration.

03 Advantages

  • Rated about 1000 °C, oxidation and carburization resistant; 2. High stable resistivity for porous burners and heaters; 3. High porosity for uniform combustion and low NOx; 4. Pleatable and weldable into burner nozzles; 5. Longer life than stainless felt in hot service.

04 Applications

For fully premixed metal fiber burners, infrared burner panels, hot gas dust filter cartridges, catalytic combustion supports and electric heating plates. Thickness, porosity and dimensions customizable.

Sizing & selection Q&A

Are non-standard sizes possible?

Yes. Cut or tooled to drawing, with hole pattern, thickness and weld type as specified.

Do you accept small batches?

Small batches are fine, and stock sizes ship from shelf.

Is a trial batch possible?

A trial batch on your equipment is the normal route; the data is signed off before volume.

What do you need from me to quote?

Flow rate, temperature and gas composition, plus the installation envelope. Those three are enough for a proposal; the rest is settled at technical agreement stage.

Applications

Metal fiber burners Hot gas filtration Catalyst support Custom

All data above are obtained under specific test conditions; the actual solution must be engineered to site conditions. AIFILTECH provides custom design and sizing based on actual gas volume, temperature, dust characteristics and emission limits.

WhatsApp