AIFILTECH High-Temperature Solenoid Valve

Media temp Up to 450 °C
Coil ED100% duty
Orifice DN8~DN100

Product Introduction

High-temperature solenoid valves use heat-resistant coils and cooling designs for media up to 180-450 °C, in a full range of orifice sizes - automatic on-off control of kiln gas, steam and thermal oil lines.

Specifications

FeaturesHeat-resistant coil, cooling neck
CustomBy selection
BrandAIFILTECH
阀体Material不锈钢/黄铜
Media temperature180-450 ℃
OrificeDN8-DN100
Control常闭/常开
Connection螺纹/法兰

Detailed Overview

01 Product Overview

The valve consists of a heat-resistant solenoid coil, thermally conductive isolation housing and a forged stainless steel or brass body with high-temperature FKM or metal sealing. An extended neck and cooling fins isolate the coil from the hot media, keeping coil temperature rise within limits for continuous duty.

02 Performance & Mechanism

Energizing the coil lifts the armature to open the main orifice; de-energizing closes it by spring and media pressure. Pilot operation uses media pressure differential for large orifices at low power; the high-temperature design ensures reliable switching with media up to 450 °C.

03 Advantages

  • Media temperature 180-450 °C, full model range; 2. Heat-resistant coil for 100% duty without burnout; 3. Stainless steel or brass body, pressure and corrosion resistant; 4. NC/NO and explosion-proof options; 5. Orifice DN8-DN100 with threaded and flanged connections.

04 Applications

For kiln gas main and branch control, steam lines, thermal oil heaters, hot air furnaces and high-temperature washing equipment. Selection by media, temperature and pressure with datasheets and wiring support.

Sizing & selection Q&A

How is the body material chosen?

The body is stainless steel or brass, rated 180-450 °C depending on seal and coil class; the material can be changed within the same port size. Where chlorides or sulphur are present, the corrosion class is checked before the body material is fixed.

Are non-standard sizes possible?

Yes. Cut or tooled to drawing, with hole pattern, thickness and weld type as specified.

Do you accept small batches?

Small batches are fine, and stock sizes ship from shelf.

Is a trial batch possible?

A trial batch on your equipment is the normal route; the data is signed off before volume.

Applications

Kiln gas lines Steam lines Thermal oil Custom

All data above are obtained under specific test conditions; the actual solution must be engineered to site conditions. AIFILTECH provides custom design and sizing based on actual gas volume, temperature, dust characteristics and emission limits.

WhatsApp